Steel Expanded Metal U-Edging-18GA 5/16 x 1

Steel Expanded Metal U-Edging-18GA 5/16 x 1

Steel Expanded Metal U-Edging-18GA 5/16 x 1

Price range: $11.00 through $22.00

Part#: SUEDGING5161 Categories , , ,
DESCRIPTION

Steel U edging is a U-shaped strip of metal that’s attached to the edges of expanded metal, perforated metal, or wire mesh sheets to make them safer and more attractive. It can be attached by welding or press-fitting.

Steel U edging is used in a variety of projects, including designer infill panels, railing systems, and gate panels.

Here are some things to consider about steel U edging:

  • Materials: Steel U edging is available in a variety of materials, including carbon steel, stainless steel, aluminum, and galvanized steel.
  • Base sizes: Steel U edging comes in different base sizes, such as 1/16″, 1/8″, and 1/4″. The base size you need depends on the type of sheet you’re attaching it to.
  • Length: Steel U edging can be cut to the length needed for your project. Stock lengths are often available in 4 ft, 8 ft, and 12 ft.
  • Installation: Steel U edging is easy to install.
  • Maintenance: Metal edging is long-lasting and maintenance-free.
* Prices subject to change without notice due to the Metals Market fluctuations. | All ‘value length’ and ‘value pack’ item measurements are subject to a “mill tolerance”. | A product may be produced several thousandths of an inch, either over or under the stated thickness, and still be within “mill tolerance”. Since we cut the material specifically for your order, they follow these tolerances: Length: +0.125″ / -0.062” – Please note that during cutting, the blade removes about 1/16″ of material (kerf). This is a normal part of the process and is already considered within the stated tolerances.