Steel Expanded Metal Flattened 1/2 #13

Steel Expanded Metal Flattened 1/2 #13

Steel Expanded Metal Flattened 1/2 #13

$14.00 – $44.00

Part#: N/A Category
DESCRIPTION

1/2-13F represents an expanded metal thickness of. 080 and a diamond opening of the short way (SWO) of. 240″ and long way of opening (LWO) of.

Flattened expanded metal is a sheet of steel that has been rolled flat to create a smooth surface with diamond-shaped openings. It’s made by passing standard expanded metal through a cold-roll reduction mill.

How it’s made

  • A sheet of metal is cut with multiple slits
  • The sheet is stretched to create a diamond pattern
  • The sheet is passed through flattening rollers to reduce its thickness and stretch the pattern

Uses

  • Machine guarding: Used for security and equipment enclosures
  • Grills: Used for charcoal trays, baskets, and food grates
  • Architectural paneling: Used for building facades and suspended ceilings
  • Filters: Used for air filtration
  • Decorative fencing: Used for screens and guard screens

Benefits

  • Flattened expanded metal is versatile and can be used for a wide variety of applications
  • It’s a safer choice for surfaces that are subject to human or animal contact
  • It’s easier to clean

 

* Prices subject to change without notice due to the Metals Market fluctuations.
* All ‘value length’ and ‘value pack’ item measurements are subject to a “mill tolerance”. A product may be produced several thousandths of an inch, either over or under the stated thickness, and still be within “mill tolerance”. This does NOT apply to Cut To Size items. Those will be +.125″, -0.00″ tolerances.

metals 4 u logo
Physical Address:

1240 Majesty Dr., Dallas, TX-75247

Mailing Address:

P.O. Box 560626, Dallas, TX-75247

Direct Any Correspondence To:

METALS 4U

1240 Majesty Dr., Dallas, TX-75247

+1 (214) 231-1434

Buy Securely — UPS Ships Direct to You!
credit card
Need Some Help?
WARNING
warning icon

CALIFORNIA PROPOSITION 65

This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

Prices subject to change without notice due to the Metals Market fluctuations. | All ‘value length’ and ‘value pack’ item measurements are subject to a “mill tolerance”. | A product may be produced several thousandths of an inch, either over or under the stated thickness, and still be within “mill tolerance”. This does NOT apply to Cut To Size items. Those will be +.125”, -0.00” tolerances. 

Facebook-f Instagram