Price range: $16.00 through $62.00
Steel expanded metal 1/2 #16 is a sheet of metal that has been stretched and slit to create diamond-shaped openings. It has a thickness of 0.05 in and a diamond opening of 0.312 in in the short way and 1 in in the long way
Flattened expanded metal is a sheet of steel that has been rolled flat to create a smooth surface with diamond-shaped openings. It’s made by passing standard expanded metal through a cold-roll reduction mill.
How it’s made
Uses
Benefits
Expanded Metal Orientation Notice:
Expanded metal sheets are manufactured from standard 48″ × 96″ sheets with the diamonds running in the 96″ direction (Long Way of Diamond / LWD).Because smaller pieces are cut from these master sheets, the diamond orientation on cut-to-size pieces may vary depending on the final dimensions. For example, sizes such as 12″ × 48″, 24″ × 48″, and 36″ × 48″ will typically have the diamonds running across the width rather than the length of the piece. If a specific diamond orientation is required for your project, please contact us before placing your order so we can verify availability and orientation requirements.
* Prices are subject to change without notice due to fluctuations in the metals market. | All “Value Length” and “Value Pack” item measurements are subject to standard mill tolerances. | Products may be manufactured several thousandths of an inch over or under the stated dimensions and still be within acceptable mill tolerances. All bar, tube, structural, pipe, sheet, plate, and similar products sold on our website are custom cut to the lengths and sizes selected by the customer at the time of purchase. These are not stocked as pre-cut items. Because each order is cut specifically to customer specifications, all cut materials are considered custom products and are not eligible for cancellation, return, or exchange once production has begun. Our standard cutting tolerances are:
