3/4″ x 1-1/2″ Stainless Steel True Mill Flat Bar T-304

3/4" x 1-1/2" Stainless Steel True Mill Flat Bar T-304
3/4" x 1-1/2" Stainless Steel True Mill Flat Bar T-304 - Image 2

3/4″ x 1-1/2″ Stainless Steel True Mill Flat Bar T-304

Price range: $32.65 through $175.56

Part#: SSFL434112 Category
DESCRIPTION

3/4″ x 1-1/2″ Stainless Steel Flat Bar T-304
(True Mill Flat bar)*

304 stainless steel true bar is a flat or square bar of 304 stainless steel that is milled to a specific size and has a consistent finish on all sides. True bars are more expensive than sheared or edge bars, which are cut to size and have less precise dimensions.

Explanation

  • 304 stainless steel

A versatile, corrosion-resistant alloy that’s often used in kitchen equipment, storage tanks, and other applications. It’s also known as 18/8 stainless steel because it typically contains 18% chromium and 8% nickel.

  • True bar

A flat or square bar that’s milled to specific dimensions and has a consistent finish on all sides. True bars have tight tolerances and square corners.

  • Sheared or edge bar

A bar that’s cut to size, which can result in less precise dimensions and varying finishes on each side.

Uses

  • Food industry: 304 stainless steel is resistant to most organic acids, making it ideal for use in dairy, beverage, and food industries.
  • Construction: 304 stainless steel is used in construction and other applications that require corrosion resistance.
  • Automotive: 304 stainless steel is used in the automotive industry.
  • Home improvement: 304 stainless steel is used in DIY home improvement projects.
* Prices subject to change without notice due to the Metals Market fluctuations. | All ‘value length’ and ‘value pack’ item measurements are subject to a “mill tolerance”. | A product may be produced several thousandths of an inch, either over or under the stated thickness, and still be within “mill tolerance”. Since we cut the material specifically for your order, they follow these tolerances: Length: +0.125″ / -0.062” – Please note that during cutting, the blade removes about 1/16″ of material (kerf). This is a normal part of the process and is already considered within the stated tolerances.