$6.65
A galvanized 2-hole closed 45-degree angle is a metal bracket used in construction and carpentry. It is made of galvanized steel, which means it has been coated with a layer of zinc to help protect it from corrosion. The 2-hole closed part indicates that it has two holes for screws or bolts, and the 45-degree angle describes the angle at which the bracket is bent. These brackets are used for joining or supporting wood or metal components at a 45-degree angle, providing stability and reinforcement in various structural applications.
Hole Diameter-9/16″
Hole Spacing End Distance 13/16″
Hole Spacing Center to Center- 1-7/8″
Thickness- 1/4″
Width 1-5/8″
Angle 2-1/2 x 3-1/2
* Prices subject to change without notice due to the Metals Market fluctuations.
* All ‘value length’ and ‘value pack’ item measurements are subject to a “mill tolerance”. A product may be produced several thousandths of an inch, either over or under the stated thickness, and still be within “mill tolerance”. This does NOT apply to Cut To Size items. Those will be +.125″, -0.00″ tolerances.
1240 Majesty Dr., Dallas, TX-75247
P.O. Box 560626, Dallas, TX-75247
CALIFORNIA PROPOSITION 65
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Prices subject to change without notice due to the Metals Market fluctuations. | All ‘value length’ and ‘value pack’ item measurements are subject to a “mill tolerance”. | A product may be produced several thousandths of an inch, either over or under the stated thickness, and still be within “mill tolerance”. This does NOT apply to Cut To Size items. Those will be +.125”, -0.00” tolerances.