3/8″ Aluminum Square Bar 6061-T6

3/8" Aluminum Square Bar 6061-T6

3/8″ Aluminum Square Bar 6061-T6

$5.00 – $29.00

Part#: ASQ6138 Categories ,
DESCRIPTION

A 3/8″ aluminum square bar 6061-T6 is a solid aluminum bar with a square cross-section, made from a popular high-strength alloy. Here’s the full lowdown:

📐 Basic Specs:

  • Size: 3/8 inch x 3/8 inch (0.375″ on each side)
  • Material: Aluminum Alloy 6061
  • Temper: T6 (heat-treated and aged for strength)
  • Shape: Square Bar (solid, not hollow)

🧪 6001-T6 Aluminum – Why It’s Great:

  • Strength: Strong enough for structural uses, light enough for performance.
  • Corrosion Resistance: Very good – holds up well in outdoor, marine, and industrial environments.
  • Machinability: Excellent – easy to cut, drill, and shape.
  • Weldability: One of the best aluminum alloys for welding.
  • T6 Temper: Solution heat-treated and artificially aged to achieve higher mechanical strength.

🔧 Typical Uses for a 3/8″ Square Bar:

  • Machined components or tooling parts
  • Brackets, braces, and supports
  • Structural elements in light frameworks
  • Spacers or standoffs
  • DIY, fabrication, robotics, and prototyping
  • Decorative metalwork or architectural details

(Sold as a Value Pack of 6 pcs at 48″ long)*

* Prices subject to change without notice due to the Metals Market fluctuations.
* All ‘value length’ and ‘value pack’ item measurements are subject to a “mill tolerance”. A product may be produced several thousandths of an inch, either over or under the stated thickness, and still be within “mill tolerance”. This does NOT apply to Cut To Size items. Those will be +.125″, -0.00″ tolerances.

metals 4 u logo
Physical Address:

1240 Majesty Dr., Dallas, TX-75247

Mailing Address:

P.O. Box 560626, Dallas, TX-75247

Direct Any Correspondence To:

METALS 4U

1240 Majesty Dr., Dallas, TX-75247

+1 (214) 231-1434

Buy Securely — UPS Ships Direct to You!
credit card
Need Some Help?
WARNING
warning icon

CALIFORNIA PROPOSITION 65

This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

Prices subject to change without notice due to the Metals Market fluctuations. | All ‘value length’ and ‘value pack’ item measurements are subject to a “mill tolerance”. | A product may be produced several thousandths of an inch, either over or under the stated thickness, and still be within “mill tolerance”. This does NOT apply to Cut To Size items. Those will be +.125”, -0.00” tolerances. 

Facebook-f Instagram