1/8″ Aluminum Round Bar 6061-T6

1/8" Aluminum Round Bar 6061-T6

1/8″ Aluminum Round Bar 6061-T6

$5.00 – $62.00

Part#: ARO6118 Categories ,
DESCRIPTION

A 1/8″ aluminum round bar 6061-T6 is a solid cylindrical piece of aluminum alloy that has the following characteristics:

🔩 Specs Overview:

  • Diameter: 1/8 inch (0.125 inches or ~3.175 mm)
  • Material: Aluminum Alloy 6061
  • Temper: T6 (heat-treated for increased strength and hardness)
  • Shape: Round Bar (solid, not hollow)

🔧 About 6061-T6 Aluminum:

  • Composition: Primarily aluminum with magnesium and silicon.
  • Properties:
    • High strength-to-weight ratio
    • Good corrosion resistance (especially against moisture and some chemicals)
    • Excellent machinability and weldability
    • T6 tempering means it’s been solution heat-treated and artificially aged for max strength
  • Common Uses:
    • Aerospace components
    • Marine hardware
    • Structural applications
    • DIY projects, robotics, and model making

📏 Typical Applications for 1/8″ Size:

Because of its small diameter, a 1/8″ round bar is often used for:

  • Pins or dowels
  • Lightweight structural rods
  • Hobby and craft projects
  • Custom brackets or spacers
  • Machined parts in precision work

1/8″ Aluminum Round 6061-T6 (Sold as a Value Pack of 21 pcs at 48″ long – snap cut)*

* Prices subject to change without notice due to the Metals Market fluctuations.
* All ‘value length’ and ‘value pack’ item measurements are subject to a “mill tolerance”. A product may be produced several thousandths of an inch, either over or under the stated thickness, and still be within “mill tolerance”. This does NOT apply to Cut To Size items. Those will be +.125″, -0.00″ tolerances.

metals 4 u logo
Physical Address:

1240 Majesty Dr., Dallas, TX-75247

Mailing Address:

P.O. Box 560626, Dallas, TX-75247

Direct Any Correspondence To:

METALS 4U

1240 Majesty Dr., Dallas, TX-75247

+1 (214) 231-1434

Buy Securely — UPS Ships Direct to You!
credit card
Need Some Help?
WARNING
warning icon

CALIFORNIA PROPOSITION 65

This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

Prices subject to change without notice due to the Metals Market fluctuations. | All ‘value length’ and ‘value pack’ item measurements are subject to a “mill tolerance”. | A product may be produced several thousandths of an inch, either over or under the stated thickness, and still be within “mill tolerance”. This does NOT apply to Cut To Size items. Those will be +.125”, -0.00” tolerances. 

Facebook-f Instagram