$60.00 – $170.00
Aluminum Perforated Sheet Metal 0.063″x1/4″ holes on 3/8″ staggered
An aluminum perforated sheet metal is a sheet of aluminum that has been punched with a pattern of holes, creating a perforated design, allowing for air, light, or liquid to pass through while maintaining structural integrity; commonly used in applications like ventilation, filtration, acoustic panels, and decorative design due to its lightweight and corrosion-resistant properties.
Key points about aluminum perforated sheet metal:
• Material: Made from aluminum sheet metal.
• Process: Holes are punched into the sheet using a machine, creating a pattern of perforations.
• Benefits: Lightweight, good corrosion resistance, versatile design options with various hole sizes and patterns.
Common applications:
• Ventilation systems: Air diffusers, grilles
• Filtration systems: Filters for liquids and gases
• Architectural design: Facades, sunshades, wall panels
• Acoustic panels: Sound absorption in buildings
• Machine guards: Protecting machinery while allowing for visibility
• Decorative elements: Interior and exterior design accents
* Prices subject to change without notice due to the Metals Market fluctuations.
* All ‘value length’ and ‘value pack’ item measurements are subject to a “mill tolerance”. A product may be produced several thousandths of an inch, either over or under the stated thickness, and still be within “mill tolerance”. This does NOT apply to Cut To Size items. Those will be +.125″, -0.00″ tolerances.
1240 Majesty Dr., Dallas, TX-75247
P.O. Box 560626, Dallas, TX-75247
CALIFORNIA PROPOSITION 65
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Prices subject to change without notice due to the Metals Market fluctuations. | All ‘value length’ and ‘value pack’ item measurements are subject to a “mill tolerance”. | A product may be produced several thousandths of an inch, either over or under the stated thickness, and still be within “mill tolerance”. This does NOT apply to Cut To Size items. Those will be +.125”, -0.00” tolerances.