1/2″ x 1/2″ x 1/8″ Aluminum Angle 6063-T5 Square Corner

aluminum

1/2″ x 1/2″ x 1/8″ Aluminum Angle 6063-T5 Square Corner

$1.81 – $24.53

Part#: AAN63121218 Categories ,
DESCRIPTION

An Aluminum Angle 1/2″ x 1/2″ x 1/8″ 6063-T5

📐 Dimensions

  • Leg A: 1/2 inch (0.500″)
  • Leg B: 1/2 inch (0.500″)
  • Thickness: 1/8 inch (0.125″)
  • Shape: 90° angle (L-shape)

🧪 Material: 6063-T5 Aluminum

  • 6063: A popular architectural-grade aluminum alloy
    • Excellent corrosion resistance
    • Smooth surface finish
    • Good for welding, machining, and anodizing
  • T5 temper: Heat-treated and artificially aged to balance strength and formability

⚙️ Typical Properties

Property Value
Tensile Strength ~22,000 psi
Yield Strength ~16,000 psi
Modulus of Elasticity ~10 million psi
Brinell Hardness ~60
Density 0.0975 lb/in³
   

⚖️ Approximate Weight

  • Weight per foot ≈ 0.127 lb/ft (or ~2.04 oz/ft)

🛠️ Common Applications

  • Light-duty brackets, frames, and supports
  • Architectural or decorative trim
  • Furniture, signs, or DIY enclosures
  • Projects where moderate strength and corrosion resistance are important

(Value Pack of 6 pcs at 48″ long)*

* Prices subject to change without notice due to the Metals Market fluctuations.
* All ‘value length’ and ‘value pack’ item measurements are subject to a “mill tolerance”. A product may be produced several thousandths of an inch, either over or under the stated thickness, and still be within “mill tolerance”. This does NOT apply to Cut To Size items. Those will be +.125″, -0.00″ tolerances.

metals 4 u logo
Physical Address:

1240 Majesty Dr., Dallas, TX-75247

Mailing Address:

P.O. Box 560626, Dallas, TX-75247

Direct Any Correspondence To:

METALS 4U

1240 Majesty Dr., Dallas, TX-75247

+1 (214) 231-1434

Buy Securely — UPS Ships Direct to You!
credit card
Need Some Help?
WARNING
warning icon

CALIFORNIA PROPOSITION 65

This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

Prices subject to change without notice due to the Metals Market fluctuations. | All ‘value length’ and ‘value pack’ item measurements are subject to a “mill tolerance”. | A product may be produced several thousandths of an inch, either over or under the stated thickness, and still be within “mill tolerance”. This does NOT apply to Cut To Size items. Those will be +.125”, -0.00” tolerances. 

Facebook-f Instagram