$1.43 – $22.03
An Aluminum Angle 1/2″ x 1/2″ x 1/16″ 6063-T5
📐 Dimensions
🧪 Material – 6063-T5 Aluminum
🔩 Mechanical Properties (Typical for 6063-T5)
| Property | Value |
| Tensile Strength | ~22,000 psi |
| Yield Strength | ~16,000 psi |
| Hardness | ~60 Brinell |
| Density | 0.0975 lb/in³ |
| Melting Point | ~1150°F (621°C) |
🛠️ Common Applications
1/2″ x 1/2″ x 1/16″ Aluminum Angle 6063-T5 Square Corner Architectural
(Value Pack of 10 pcs at 48″ long)*
* Prices subject to change without notice due to the Metals Market fluctuations.
* All ‘value length’ and ‘value pack’ item measurements are subject to a “mill tolerance”. A product may be produced several thousandths of an inch, either over or under the stated thickness, and still be within “mill tolerance”. This does NOT apply to Cut To Size items. Those will be +.125″, -0.00″ tolerances.
1240 Majesty Dr., Dallas, TX-75247
P.O. Box 560626, Dallas, TX-75247
CALIFORNIA PROPOSITION 65
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Prices subject to change without notice due to the Metals Market fluctuations. | All ‘value length’ and ‘value pack’ item measurements are subject to a “mill tolerance”. | A product may be produced several thousandths of an inch, either over or under the stated thickness, and still be within “mill tolerance”. This does NOT apply to Cut To Size items. Those will be +.125”, -0.00” tolerances.