5/8″ Steel Square Bar A-36

5/8" Steel Square Bar A-36
5/8" Steel Square Bar A-36 - Image 2
5/8" Steel Square Bar A-36 - Image 3

5/8″ Steel Square Bar A-36

Price range: $8.00 through $17.73

Part#: SSQ58 Category
DESCRIPTION

5/8″ Steel Square Bar A-36, Hot-Rolled

An “HR steel square bar” refers to a square-shaped steel bar produced through the “hot rolled” process. This means the steel was rolled at a high temperature above its recrystallization point, making it easier to shape and form into the desired square cross-section; essentially, it’s a hot-rolled mild steel bar with a square profile.

Key points about HR steel square bar:

  • “HR”: Stands for “Hot Rolled”.
  • Square bar: Indicates the cross-section of the steel bar is square shaped.
  • Hot rolling process: Steel is heated to a high temperature and then rolled through machinery to achieve the desired shape.

Uses

  • Construction: Steel square bars are used in heavy-duty construction applications. They are strong, durable, and resistant to corrosion.
  • Industrial components: Steel square bars are used in the manufacturing of industrial components, such as tools and dies.
  • Agriculture: Steel square bars are used in agriculture, including fencing, gates, and protective barriers.
  • Oil and gas: Steel square bars are used in the oil and gas industry.
  • Defense: Steel square bars are used in the defense industry.
  • Power generation: Steel square bars are used in the power generation industry.
  • Brewing and beverage production: Steel square bars are used in brewing and beverage production.
* Prices subject to change without notice due to the Metals Market fluctuations. | All ‘value length’ and ‘value pack’ item measurements are subject to a “mill tolerance”. | A product may be produced several thousandths of an inch, either over or under the stated thickness, and still be within “mill tolerance”. Since we cut the material specifically for your order, they follow these tolerances: Length: +0.125″ / -0.062” – Please note that during cutting, the blade removes about 1/16″ of material (kerf). This is a normal part of the process and is already considered within the stated tolerances.