Steel Standard Grating #3

Steel Standard Grating #3

Steel Standard Grating #3

$34.72 – $84.16

Part#: SSXM3 Category
DESCRIPTION

#3 Steel expanded metal is a type of expanded metal made from steel, characterized by its specific pattern and dimensions.

Standard expanded steel is a sheet metal with a raised, diamond-shaped pattern. It’s also known as raised expanded metal or regular expanded metal.

Features

  • The diamond-shaped openings are slightly raised
  • The sheet has increased rigidity
  • The surface is rough to the touch
  • The strands and bonds are set at a uniform angle to the plane of the sheet

Uses

Screens, Window security panels, Machine guards, Shelving, Signage, Ceiling tile applications, Fencing, Filters, Grills, and Guard screens.

Materials Aluminum, Carbon steel, Galvanized steel, and Stainless steel.

Production

  • The unique raised pattern of diamond-shaped openings is created by slitting and stretching the sheet metal
  • The strands and bonds are set at a uniform angle to the plane of the sheet

Other types of expanded metal

  • Flattened expanded metal, where the strands have been cold rolled to bring them into one plane, thus providing a flat surface

 

* Prices subject to change without notice due to the Metals Market fluctuations.
* All ‘value length’ and ‘value pack’ item measurements are subject to a “mill tolerance”. A product may be produced several thousandths of an inch, either over or under the stated thickness, and still be within “mill tolerance”. This does NOT apply to Cut To Size items. Those will be +.125″, -0.00″ tolerances.

metals 4 u logo
Physical Address:

1240 Majesty Dr., Dallas, TX-75247

Mailing Address:

P.O. Box 560626, Dallas, TX-75247

Direct Any Correspondence To:

METALS 4U

1240 Majesty Dr., Dallas, TX-75247

+1 (214) 231-1434

Buy Securely — UPS Ships Direct to You!
credit card
Need Some Help?
WARNING
warning icon

CALIFORNIA PROPOSITION 65

This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

Prices subject to change without notice due to the Metals Market fluctuations. | All ‘value length’ and ‘value pack’ item measurements are subject to a “mill tolerance”. | A product may be produced several thousandths of an inch, either over or under the stated thickness, and still be within “mill tolerance”. This does NOT apply to Cut To Size items. Those will be +.125”, -0.00” tolerances. 

Facebook-f Instagram