$2.85
A 3/4″ Sch 40 Steel Elbow Pipe 45 Degrees refers to a steel pipe fitting that has a diameter of 3/4 inch and a 45-degree bend designed to change the direction of flow in a piping system by 45 degrees. This type of elbow is commonly used for changing the direction of flow in piping systems and is suitable for various applications, including plumbing, construction, and industrial settings. The “Sch 40” designation indicates that the pipe has a standard wall thickness, which is important for applications where pressure is a factor.
* Prices subject to change without notice due to the Metals Market fluctuations.
* All ‘value length’ and ‘value pack’ item measurements are subject to a “mill tolerance”. A product may be produced several thousandths of an inch, either over or under the stated thickness, and still be within “mill tolerance”. This does NOT apply to Cut To Size items. Those will be +.125″, -0.00″ tolerances.
1240 Majesty Dr., Dallas, TX-75247
P.O. Box 560626, Dallas, TX-75247
CALIFORNIA PROPOSITION 65
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Prices subject to change without notice due to the Metals Market fluctuations. | All ‘value length’ and ‘value pack’ item measurements are subject to a “mill tolerance”. | A product may be produced several thousandths of an inch, either over or under the stated thickness, and still be within “mill tolerance”. This does NOT apply to Cut To Size items. Those will be +.125”, -0.00” tolerances.