$25.45
A 1-1/2″ aluminum elbow pipe has a diameter of 1-1/2 inches and is designed to change the direction of flow in a piping system by 90 degrees. The 90-degree angle means that it can be used to create a right angle turn in the piping. This type of fitting is commonly used in various applications such as plumbing, HVAC systems, and industrial piping to redirect the flow of liquids, gases, or air. The use of aluminum makes these fittings lightweight, corrosion-resistant, and suitable for a wide range of operating temperatures.
* Prices subject to change without notice due to the Metals Market fluctuations.
* All ‘value length’ and ‘value pack’ item measurements are subject to a “mill tolerance”. A product may be produced several thousandths of an inch, either over or under the stated thickness, and still be within “mill tolerance”. This does NOT apply to Cut To Size items. Those will be +.125″, -0.00″ tolerances.
1240 Majesty Dr., Dallas, TX-75247
P.O. Box 560626, Dallas, TX-75247
CALIFORNIA PROPOSITION 65
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Prices subject to change without notice due to the Metals Market fluctuations. | All ‘value length’ and ‘value pack’ item measurements are subject to a “mill tolerance”. | A product may be produced several thousandths of an inch, either over or under the stated thickness, and still be within “mill tolerance”. This does NOT apply to Cut To Size items. Those will be +.125”, -0.00” tolerances.