Strut Galvanized Offset Tee Angle (LH)

$7.40

Part#: APGFS-5135EG Categories Hardware, Architectural and Ornamental, Features for Struts

DESCRIPTION

A strut galvanized offset tee angle left hand is an angle fitting used in construction and building applications. It is made of galvanized steel and is designed with an offset tee shape. The left hand refers to the left-hand orientation of the fitting used in framing and mounting systems to provide structural support and to create connections at angles or offsets in construction projects.

Hole Diameter :9/16″

Hole Spacing End Distance : 13/16″

Hole Spacing Center to Center : 1-7/8″

Thickness :1/4″

Width :1-5/8″

Dimensions: 2″ x 3-1/2″

* Prices subject to change without notice due to the Metals Market fluctuations.
* All ‘value length’ and ‘value pack’ item measurements are subject to a “mill tolerance”. A product may be produced several thousandths of an inch, either over or under the stated thickness, and still be within “mill tolerance”. This does NOT apply to Cut To Size items. Those will be +.125″, -0.00″ tolerances.

Physical Address:

1240 Majesty Dr., Dallas, TX-75247

Mailing Address:

P.O. Box 560626, Dallas, TX-75247

Direct Any Correspondence To:

METALS 4U

1240 Majesty Dr., Dallas, TX-75247

+1 (214) 231-1434

Buy Securely — UPS Ships Direct to You!

Need Some Help?

WARNING

CALIFORNIA PROPOSITION 65

This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

Prices subject to change without notice due to the Metals Market fluctuations. | All ‘value length’ and ‘value pack’ item measurements are subject to a “mill tolerance”. | A product may be produced several thousandths of an inch, either over or under the stated thickness, and still be within “mill tolerance”. This does NOT apply to Cut To Size items. Those will be +.125”, -0.00” tolerances.