1/4″ x 6″ Rectangular Aluminum Flat Bar 6061-T6 Structural

1/4" x 6" Rectangular Aluminum Flat Bar 6061-T6 Structural

1/4″ x 6″ Rectangular Aluminum Flat Bar 6061-T6 Structural

$13.29 – $72.74

Part#: AFL61146 Category
DESCRIPTION

An aluminum flat 1/4 x 6 6061-T6

📏 Dimensions:

  • Thickness: 1/4 inch (0.250″)
  • Width: 6 inches

🧪 Material – 6061-T6 Aluminum:

  • 6061 is a versatile, high-strength aluminum alloy that is heat-treated.
  • T6 temper means it has been solution heat-treated and artificially aged, maximizing its strength.

⚙️ Key Properties:

  • Tensile Strength: ~45,000 psi
  • Yield Strength: ~40,000 psi
  • Excellent corrosion resistance
  • Good weldability and machinability
  • Lightweight (about 0.68 lb per linear foot for this size)

🧰 Common Uses:

  • Structural support brackets
  • Vehicle frames and parts
  • Marine applications
  • Tooling fixtures
  • Custom fabricated parts

* Prices subject to change without notice due to the Metals Market fluctuations.
* All ‘value length’ and ‘value pack’ item measurements are subject to a “mill tolerance”. A product may be produced several thousandths of an inch, either over or under the stated thickness, and still be within “mill tolerance”. This does NOT apply to Cut To Size items. Those will be +.125″, -0.00″ tolerances.

metals 4 u logo
Physical Address:

1240 Majesty Dr., Dallas, TX-75247

Mailing Address:

P.O. Box 560626, Dallas, TX-75247

Direct Any Correspondence To:

METALS 4U

1240 Majesty Dr., Dallas, TX-75247

+1 (214) 231-1434

Buy Securely — UPS Ships Direct to You!
credit card
Need Some Help?
WARNING
warning icon

CALIFORNIA PROPOSITION 65

This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

Prices subject to change without notice due to the Metals Market fluctuations. | All ‘value length’ and ‘value pack’ item measurements are subject to a “mill tolerance”. | A product may be produced several thousandths of an inch, either over or under the stated thickness, and still be within “mill tolerance”. This does NOT apply to Cut To Size items. Those will be +.125”, -0.00” tolerances. 

Facebook-f Instagram