This site is protected by Trustwave's Trusted Commerce program
Credit Cards VISA, M/C, Discover - Buy Securely - UPS Ships Direct to You (UPS LOGO)

Tool Steel A-2 Flat Bar, Air-Hardening

Tool Steel A-2 Flat Bar, Air-Hardening

Precision Marshal A-2 Air-hardening Ground Flat Stock a2 Flat Bar is an airhardening chromium alloy die steel that replaces O1 flat bar stock when safer hardening, less distortion and increased wear resistance are required. Characteristics of A2 flat bar stock include good machinability, high compressive strength, very good non-deforming properties, deep hardening, and high dimensional stability after hardening and tempering.

Hardening A-2 Flat Bar Stock: In a control temperature oven, heat slowly to between 1875-1925°F (788-843°C), and should have a dark yellow color. Remove from heat and allow to air-cool.

Tempering A-2 Flat Bar Stock: Temper your A-2 flat bar stock by reheating to 500-950°F to relieve the stresses caused by hardening process, and to achieve the hardness needed. The lower the temperature the a2 flat bar is reheated to, the higher the level of hardness remains. Reheat for no less than 1 hour, and up to two hours.

» Tool Steel, Drill Rod » Tool Steel A-2 Flat Bar, Air-Hardening

 
The following discounts apply to all these products.
Additional 10% Off Orders Over $100
image of 3/64 (.046875) x 1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/64 (.046875) x 1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/64 (.046875) x 3/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/64 (.046875) x 3/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/64 (.046875) x 1" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/64 (.046875) x 1" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/64 (.046875) x 1-1/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/64 (.046875) x 1-1/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" length… more info »
image of 3/64 (.046875) x 1-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/64 (.046875) x 1-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" length… more info »
image of 3/64 (.046875) x 2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/64 (.046875) x 2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/16 (.0625) x 1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/16 (.0625) x 1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/16 (.0625) x 3/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/16 (.0625) x 3/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/16 (.0625) x 1" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/16 (.0625) x 1" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/16 (.0625) x 1-1/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/16 (.0625) x 1-1/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/16 (.0625) x 1-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/16 (.0625) x 1-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/16 (.0625) x 2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/16 (.0625) x 2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/16 (.0625) x 2-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/16 (.0625) x 2-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/16 (.0625) x 3" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/16 (.0625) x 3" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/16 (.0625) x 4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/16 (.0625) x 4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/16 (.0625) x 6" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/16 (.0625) x 6" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/16 (.0625) x 8" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/16 (.0625) x 8" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/64 (.078125) x 1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/64 (.078125) x 1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/64 (.078125) x 3/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/64 (.078125) x 3/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/64 (.078125) x 1" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/64 (.078125) x 1" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/64 (.078125) x 1-1/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/64 (.078125) x 1-1/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" length… more info »
image of 5/64 (.078125) x 1-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/64 (.078125) x 1-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" length… more info »
image of 5/64 (.078125) x 2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/64 (.078125) x 2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/32 (.09375) x 1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/32 (.09375) x 1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/32 (.09375) x 3/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/32 (.09375) x 3/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/32 (.09375) x 1" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/32 (.09375) x 1" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/32 (.09375) x 1-1/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/32 (.09375) x 1-1/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/32 (.09375) x 1-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/32 (.09375) x 1-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/32 (.09375) x 2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/32 (.09375) x 2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/32 (.09375) x 2-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/32 (.09375) x 2-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/32 (.09375) x 3" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/32 (.09375) x 3" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/32 (.09375) x 4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/32 (.09375) x 4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/32 (.09375) x 5" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/32 (.09375) x 5" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/32 (.09375) x 6" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/32 (.09375) x 6" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/32 (.09375) x 8" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/32 (.09375) x 8" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 7/64 (.109375) x 1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
7/64 (.109375) x 1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 7/64 (.109375) x 3/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
7/64 (.109375) x 3/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 7/64 (.109375) x 1" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
7/64 (.109375) x 1" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 7/64 (.109375) x 1-1/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
7/64 (.109375) x 1-1/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" length… more info »
image of 7/64 (.109375) x 1-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
7/64 (.109375) x 1-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" length… more info »
image of 7/64 (.109375) x 2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
7/64 (.109375) x 2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/8 (.125) x 1/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/8 (.125) x 1/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/8 (.125) x 3/8" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/8 (.125) x 3/8" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/8 (.125) x 1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/8 (.125) x 1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/8 (.125) x 5/8" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/8 (.125) x 5/8" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/8 (.125) x 3/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/8 (.125) x 3/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/8 (.125) x 1" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/8 (.125) x 1" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/8 (.125) x 1-1/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/8 (.125) x 1-1/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/8 (.125) x 1-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/8 (.125) x 1-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/8 (.125) x 1-3/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/8 (.125) x 1-3/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/8 (.125) x 2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/8 (.125) x 2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/8 (.125) x 2-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/8 (.125) x 2-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/8 (.125) x 3" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/8 (.125) x 3" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/8 (.125) x 3-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/8 (.125) x 3-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/8 (.125) x 4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/8 (.125) x 4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/8 (.125) x 5" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/8 (.125) x 5" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/8 (.125) x 6" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/8 (.125) x 6" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/8 (.125) x 7" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/8 (.125) x 7" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/8 (.125) x 8" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/8 (.125) x 8" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/8 (.125) x 10" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/8 (.125) x 10" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/8 (.125) x 12" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/8 (.125) x 12" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/32 (.15625) x 1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/32 (.15625) x 1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/32 (.15625) x 3/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/32 (.15625) x 3/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/32 (.15625) x 1" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/32 (.15625) x 1" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/32 (.15625) x 1-1/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/32 (.15625) x 1-1/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/32 (.15625) x 1-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/32 (.15625) x 1-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/32 (.15625) x 1-3/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/32 (.15625) x 1-3/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/32 (.15625) x 2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/32 (.15625) x 2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/32 (.15625) x 2-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/32 (.15625) x 2-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/32 (.15625) x 3" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/32 (.15625) x 3" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/32 (.15625) x 3-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/32 (.15625) x 3-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/32 (.15625) x 4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/32 (.15625) x 4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/32 (.15625) x 5" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/32 (.15625) x 5" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/32 (.15625) x 6" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/32 (.15625) x 6" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/32 (.15625) x 8" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/32 (.15625) x 8" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/16 (.1875) x 3/16" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/16 (.1875) x 3/16" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/16 (.1875) x 3/8" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/16 (.1875) x 3/8" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/16 (.1875) x 1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/16 (.1875) x 1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/16 (.1875) x 5/8" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/16 (.1875) x 5/8" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/16 (.1875) x 3/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/16 (.1875) x 3/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/16 (.1875) x 1" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/16 (.1875) x 1" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/16 (.1875) x 1-1/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/16 (.1875) x 1-1/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/16 (.1875) x 1-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/16 (.1875) x 1-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/16 (.1875) x 1-3/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/16 (.1875) x 1-3/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/16 (.1875) x 2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/16 (.1875) x 2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/16 (.1875) x 2-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/16 (.1875) x 2-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/16 (.1875) x 3" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/16 (.1875) x 3" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/16 (.1875) x 3-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/16 (.1875) x 3-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/16 (.1875) x 4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/16 (.1875) x 4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/16 (.1875) x 5" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/16 (.1875) x 5" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/16 (.1875) x 6" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/16 (.1875) x 6" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/16 (.1875) x 7" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/16 (.1875) x 7" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/16 (.1875) x 8" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/16 (.1875) x 8" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/16 (.1875) x 10" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/16 (.1875) x 10" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/16 (.1875) x 12" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/16 (.1875) x 12" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 7/32 (.21875) x 1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
7/32 (.21875) x 1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 7/32 (.21875) x 3/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
7/32 (.21875) x 3/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 7/32 (.21875) x 1" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
7/32 (.21875) x 1" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 7/32 (.21875) x 1-1/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
7/32 (.21875) x 1-1/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 7/32 (.21875) x 1-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
7/32 (.21875) x 1-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 7/32 (.21875) x 2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
7/32 (.21875) x 2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 7/32 (.21875) x 2-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
7/32 (.21875) x 2-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 7/32 (.21875) x 3" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
7/32 (.21875) x 3" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 7/32 (.21875) x 4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
7/32 (.21875) x 4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/4 (.250) x 1/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/4 (.250) x 1/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/4 (.250) x 5/16" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/4 (.250) x 5/16" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/4 (.250) x 3/8" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/4 (.250) x 3/8" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/4 (.250) x 1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/4 (.250) x 1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/4 (.250) x 5/8" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/4 (.250) x 5/8" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/4 (.250) x 3/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/4 (.250) x 3/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/4 (.250) x 1" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/4 (.250) x 1" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/4 (.250) x 1-1/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/4 (.250) x 1-1/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/4 (.250) x 1-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/4 (.250) x 1-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/4 (.250) x 1-3/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/4 (.250) x 1-3/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/4 (.250) x 2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/4 (.250) x 2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/4 (.250) x 2-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/4 (.250) x 2-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/4 (.250) x 3" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/4 (.250) x 3" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/4 (.250) x 3-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/4 (.250) x 3-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/4 (.250) x 4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/4 (.250) x 4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/4 (.250) x 5" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/4 (.250) x 5" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/4 (.250) x 6" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/4 (.250) x 6" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/4 (.250) x 8" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/4 (.250) x 8" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/4 (.250) x 10" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/4 (.250) x 10" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/4 (.250) x 12" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/4 (.250) x 12" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/16 (.3125) x 5/16" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/16 (.3125) x 5/16" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/16 (.3125) x 3/8" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/16 (.3125) x 3/8" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/16 (.3125) x 1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/16 (.3125) x 1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/16 (.3125) x 5/8" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/16 (.3125) x 5/8" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/16 (.3125) x 3/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/16 (.3125) x 3/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/16 (.3125) x 1" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/16 (.3125) x 1" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/16 (.3125) x 1-1/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/16 (.3125) x 1-1/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/16 (.3125) x 1-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/16 (.3125) x 1-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/16 (.3125) x 1-3/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/16 (.3125) x 1-3/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/16 (.3125) x 2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/16 (.3125) x 2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/16 (.3125) x 2-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/16 (.3125) x 2-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/16 (.3125) x 3" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/16 (.3125) x 3" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/16 (.3125) x 3-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/16 (.3125) x 3-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/16 (.3125) x 4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/16 (.3125) x 4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/16 (.3125) x 5" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/16 (.3125) x 5" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/16 (.3125) x 6" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/16 (.3125) x 6" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/16 (.3125) x 8" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/16 (.3125) x 8" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/16 (.3125) x 10" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/16 (.3125) x 10" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/16 (.3125) x 12" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/16 (.3125) x 12" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/8 (.375) x 3/8" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/8 (.375) x 3/8" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/8 (.375) x 1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/8 (.375) x 1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/8 (.375) x 5/8" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/8 (.375) x 5/8" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/8 (.375) x 3/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/8 (.375) x 3/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/8 (.375) x 1" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/8 (.375) x 1" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/8 (.375) x 1-1/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/8 (.375) x 1-1/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/8 (.375) x 1-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/8 (.375) x 1-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/8 (.375) x 1-3/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/8 (.375) x 1-3/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/8 (.375) x 2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/8 (.375) x 2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/8 (.375) x 2-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/8 (.375) x 2-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/8 (.375) x 3" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/8 (.375) x 3" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/8 (.375) x 3-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/8 (.375) x 3-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/8 (.375) x 4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/8 (.375) x 4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/8 (.375) x 5" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/8 (.375) x 5" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/8 (.375) x 6" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/8 (.375) x 6" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/8 (.375) x 8" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/8 (.375) x 8" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/8 (.375) x 10" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/8 (.375) x 10" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/8 (.375) x 12" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/8 (.375) x 12" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/2 (.500) x 1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/2 (.500) x 1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/2 (.500) x 5/8" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/2 (.500) x 5/8" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/2 (.500) x 3/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/2 (.500) x 3/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/2 (.500) x 1" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/2 (.500) x 1" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/2 (.500) x 1-1/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/2 (.500) x 1-1/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/2 (.500) x 1-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/2 (.500) x 1-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/2 (.500) x 1-3/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/2 (.500) x 1-3/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/2 (.500) x 2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/2 (.500) x 2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/2 (.500) x 2-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/2 (.500) x 2-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/2 (.500) x 3" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/2 (.500) x 3" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/2 (.500) x 3-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/2 (.500) x 3-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/2 (.500) x 4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/2 (.500) x 4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/2 (.500) x 5" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/2 (.500) x 5" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/2 (.500) x 6" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/2 (.500) x 6" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/2 (.500) x 7" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/2 (.500) x 7" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/2 (.500) x 8" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/2 (.500) x 8" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/2 (.500) x 10" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/2 (.500) x 10" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1/2 (.500) x 12" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1/2 (.500) x 12" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/8 (.625) x 5/8" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/8 (.625) x 5/8" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/8 (.625) x 3/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/8 (.625) x 3/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/8 (.625) x 1" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/8 (.625) x 1" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/8 (.625) x 1-1/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/8 (.625) x 1-1/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/8 (.625) x 1-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/8 (.625) x 1-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/8 (.625) x 2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/8 (.625) x 2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/8 (.625) x 2-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/8 (.625) x 2-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/8 (.625) x 3" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/8 (.625) x 3" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/8 (.625) x 4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/8 (.625) x 4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/8 (.625) x 5" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/8 (.625) x 5" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/8 (.625) x 6" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/8 (.625) x 6" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/8 (.625) x 8" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/8 (.625) x 8" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 5/8 (.625) x 10" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
5/8 (.625) x 10" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/4 (.750) x 3/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/4 (.750) x 3/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/4 (.750) x 1" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/4 (.750) x 1" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/4 (.750) x 1-1/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/4 (.750) x 1-1/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/4 (.750) x 1-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/4 (.750) x 1-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/4 (.750) x 1-3/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/4 (.750) x 1-3/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/4 (.750) x 2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/4 (.750) x 2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/4 (.750) x 2-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/4 (.750) x 2-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/4 (.750) x 3" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/4 (.750) x 3" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/4 (.750) x 4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/4 (.750) x 4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/4 (.750) x 5" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/4 (.750) x 5" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 3/4 (.750) x 6" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
3/4 (.750) x 6" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 7/8 (.875) x 7/8" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
7/8 (.875) x 7/8" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 7/8 (.875) x 1" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
7/8 (.875) x 1" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 7/8 (.875) x 1-1/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
7/8 (.875) x 1-1/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 7/8 (.875) x 1-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
7/8 (.875) x 1-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 7/8 (.875) x 2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
7/8 (.875) x 2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 7/8 (.875) x 2-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
7/8 (.875) x 2-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 7/8 (.875) x 3" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
7/8 (.875) x 3" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 7/8 (.875) x 4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
7/8 (.875) x 4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 7/8 (.875) x 6" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
7/8 (.875) x 6" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1 (1.00) x 1" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1 (1.00) x 1" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1 (1.00) x 1-1/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1 (1.00) x 1-1/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1 (1.00) x 1-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1 (1.00) x 1-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1 (1.00) x 1-3/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1 (1.00) x 1-3/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1 (1.00) x 2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1 (1.00) x 2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1 (1.00) x 2-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1 (1.00) x 2-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1 (1.00) x 3" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1 (1.00) x 3" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1 (1.00) x 4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1 (1.00) x 4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1 (1.00) x 5" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1 (1.00) x 5" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1 (1.00) x 6" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1 (1.00) x 6" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1-1/4 (1.250) x 1-1/4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1-1/4 (1.250) x 1-1/4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1-1/4 (1.250) x 1-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1-1/4 (1.250) x 1-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1-1/4 (1.250) x 2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1-1/4 (1.250) x 2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1-1/4 (1.250) x 2-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1-1/4 (1.250) x 2-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1-1/4 (1.250) x 3" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1-1/4 (1.250) x 3" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1-1/4 (1.250) x 4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1-1/4 (1.250) x 4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1-1/4 (1.250) x 5" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1-1/4 (1.250) x 5" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1-1/4 (1.250) x 6" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1-1/4 (1.250) x 6" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1-1/2 (1.500) x 1-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1-1/2 (1.500) x 1-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1-1/2 (1.500) x 2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1-1/2 (1.500) x 2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1-1/2 (1.500) x 2-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1-1/2 (1.500) x 2-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1-1/2 (1.500) x 3" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1-1/2 (1.500) x 3" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1-1/2 (1.500) x 3-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1-1/2 (1.500) x 3-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1-1/2 (1.500) x 4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1-1/2 (1.500) x 4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1-1/2 (1.500) x 5" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1-1/2 (1.500) x 5" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 1-1/2 (1.500) x 6" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
1-1/2 (1.500) x 6" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 2 (2.00) x 2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
2 (2.00) x 2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 2 (2.00) x 2-1/2" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
2 (2.00) x 2-1/2" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 2 (2.00) x 3" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
2 (2.00) x 3" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
image of 2 (2.00) x 4" A-2 Ground Tool Steel Flat Stock, a2 Air-hardened (18" and 36" Lengths)
2 (2.00) x 4" A-2 Ground Tool Steel Flat Stock, A2 Air-hardened Sold in 18" and 36" lengths more info »
Direct any correspondence to:
Metals 4U - 1240 Majesty Dr., Dallas, TX 75247 USA
+1 (214) 231-1434

*Prices subject to change without notice due to the Metals Market fluctuations.
* All 'value length' and 'value pack' item measurements are subject to a "mill tolerance". A product may be produced several thousandths of an inch, either over or under the stated thickness, and still be within "mill tolerance".
This does NOT apply to Cut To Size items. Those will be +.125", -0.00" tolerances.

Prod 93 - TSFLA2
Metals4u Online logo Metals4u Online - Dallas Warehouse Located at
1240 Majesty Dr., Dallas, TX.